View MC100H601_82976.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

MOTOROLA
SEMICONDUCTOR TECHNICAL DATA
9-Bit ECL/TTL Translator
The MC10H/100H601 is a 9-bit, dual supply ECL to TTL translator. Devices in the Motorola 9-bit translator series utilize the 28-lead PLCC for optimal power pinning, signal flow-through and electrical performance. The devices feature a 48 mA TTL output stage, and AC performance is specified into both a 50 pF and 200 pF load capacitance. For the 3-state output disable, both ECL and TTL control inputs are provided, allowing maximum design flexibility. The 10H version is compatible with MECL 10H ECL logic levels. The 100H version is compatible with 100K levels. * * * * * * * * 9-Bit Ideal for Byte-Parity Applications 3-State TTL Outputs Flow-Through Configuration Extra TTL and ECL Power Pins to Minimize Switching Noise ECL and TTL 3-State Control Inputs Dual Supply 4.8 ns Max Delay into 50 pF, 9.6 ns into 200 pF (all outputs switching) PNP TTL Inputs for Low Loading
MC10H601 MC100H601
FN SUFFIX 28-LEAD PLASTIC PLCC PACKAGE CASE 776-02
PIN NAMES
PIN GND VCCE VCCT VEE D0 - D8 Q0 - Q8 OEECL OETTL FUNCTION TTL Ground (0 V) ECL VCC (0 V) TTL Supply (+ 5.0 V) ECL Supply (- 5.2 / - 4.5 V) Data Inputs (ECL) Data Outputs (TTL) 3-State Control (ECL) 3-State Control (TTL)
OEECL OETTL
TRUTH TABLE
D0 Q0 OEECL L L H X OETTL L L X H D L H X X Q L H Z Z
D1
Q1
D2
Q2
Q5 GND VCCT Q6 GND Q7 Q8
D3
Q3
Q4
26 27 28
25
24
23
22
21
20
19 18 17 16 15
D8 D7 VCCE D6 D5 D4 D3
ECL
D4
Q4
TTL
Q3 VCCT
D5
Q5
Q2 GND
2 3 4 5 6 7 8 9 10 11
14 13 12
D6
Q6
Q1 Q0
D7
Q7
OETTL NC OEECL VEE D0 D1 D2
D8
Q8
Figure 1. 28-Lead Pinout (Top View)
Figure 2. Logic Diagram
10/97
(c) Motorola, Inc. 1997
2-1
REV 7
MC10H601 MC100H601
10H ECL DC CHARACTERISTICS: VCCT = 5.0 V 10%; VEE = - 5.2 V 5%
0C Symbol S bl IEE IIH IIL VIH VIL Parameter P Power Supply Current Input HIGH Current Input LOW Current Input HIGH Voltage Input LOW Voltage 0.5 -1170 -1950 - 840 -1480 Min Max - 51 225 0.5 -1130 -1950 - 810 -1480 Min 25C Max - 51 145 0.5 -1060 -1950 - 720 -1445 Min 85C Max - 51 145 Unit Ui mA A A mV Condition C di i
100H ECL DC CHARACTERISTICS: VCCT = 5.0 V 10%; VEE = - 4.2 V to - 5.5 V
0C Symbol S bl IEE IIH IIL VIH VIL Parameter P Power Supply Current Input HIGH Current Input LOW Current Input HIGH Voltage Input LOW Voltage 0.5 -1165 -1810 - 880 -1475 Min Max - 51 225 0.5 -1165 -1810 - 880 -1475 Min 25C Max - 51 145 0.5 -1165 -1810 - 880 -1475 Min 85C Max - 53 145 Unit Ui mA A A mV Condition C di i
TTL DC CHARACTERISTICS: VCCT = 5.0 V 10%; VEE = - 5.2 V 5% (10H version);
VEE = - 4.2 V to - 5.5 V (100H version) 0C Symbol S bl ICCH ICCL ICCZ IIH IIL IOS IOZH IOZL VIHT VILT VOHT VOLT VIK Parameter P Power Supply Current Min Max 110 110 Power Supply Current Input HIGH Current Input LOW Current Output Short Circuit Current Output Disable Current HIGH Output Disable Current LOW Input HIGH Voltage Input LOW Voltage Output HIGH Voltage Output LOW Voltage Input Clamp Voltage 2.0 0.8 2.5 2.0 0.55 -1.2 2.5 2.0 0.55 -1.2 -100 105 20 100 - 0.6 - 225 50 - 50 2.0 0.8 2.5 2.0 0.55 -1.2 -100 Min 25C Max 110 110 105 20 100 - 0.6 - 225 50 - 50 2.0 0.8 V V V IOH = - 3.0 mA IOH = -15 mA IOL = 48 mA IIN = -18 mA -100 Min 85C Max 110 110 105 20 100 - 0.6 - 225 50 - 50 A mA mA A V VIN = 2.7 V VIN = 7.0 V VIN = 0.5 V VOUT = 0 V VOUT = 2.7 V VOUT = 0.5 V Unit Ui mA Condition C di i
AC CHARACTERISTICS: VCCT = 5.0 V 10%; VEE = - 5.2 V 5% (10H version);
VEE = - 4.2 V to - 5.5 V (100H version) 0C Symbol S bl tPLH tPHL tPLZ tPHZ tPLZ tPHZ tPZL tPZH tPZL tPZH tR tF Output Rise/Fall Time 1.0 V - 2.0 V Output Enable Time Parameter P Propagation Delay to Output Output Disable Time OEECL OETTL OEECL OETTL Min 1.7 3.4 3.7 5.4 4.3 7.0 3.5 5.0 4.2 6.0 Max 4.8 9.6 6.5 13 7.5 15 6.0 12 7.0 14 1.2 3.0 Min 1.7 3.4 3.7 5.4 4.3 7.0 3.5 5.0 4.2 6.0 25C Max 4.8 9.6 6.5 13 7.5 15 6.0 12 7.0 14 1.2 3.0 Min 1.7 3.4 3.7 5.4 4.3 7.0 3.5 5.0 4.2 6.0 85C Max 4.8 9.6 6.5 13 7.5 15 6.0 12 7.0 14 1.2 3.0 Unit Ui ns ns ns ns ns ns ns ns ns ns ns ns Condition C di i CL = 50 pF CL = 200 pF CL = 50 pF CL = 200 pF CL = 50 pF CL = 200 pF CL = 50 pF CL = 200 pF CL = 50 pF CL = 200 pF CL = 50 pF CL = 200 pF
MOTOROLA
2-2
MECL Data DL122 -- Rev 6
MC10H601 MC100H601
OUTLINE DIMENSIONS
FN SUFFIX PLASTIC PLCC PACKAGE CASE 776-02 ISSUE D
B -N- Y BRK U D Z -L- -M- 0.007 (0.180)
M
0.007 (0.180)
M
T L-M
S
N
S S
T L-M
N
S
W
28 1
D
X VIEW D-D
G1
0.010 (0.250)
S
T L-M
S
N
S
V
A Z R C
0.007 (0.180) 0.007 (0.180)
M
T L-M T L-M
S
N N
S
H
0.007 (0.180)
M
T L-M
S
N
S
M
S
S
E 0.004 (0.100) G G1 0.010 (0.250)
S
K1
J
-T- VIEW S
SEATING PLANE
K F VIEW S 0.007 (0.180)
M
T L-M
S
N
S
T L-M
S
N
S
NOTES: 1. DATUMS -L-, -M-, AND -N- DETERMINED WHERE TOP OF LEAD SHOULDER EXITS PLASTIC BODY AT MOLD PARTING LINE. 2. DIMENSION G1, TRUE POSITION TO BE MEASURED AT DATUM -T-, SEATING PLANE. 3. DIMENSIONS R AND U DO NOT INCLUDE MOLD FLASH. ALLOWABLE MOLD FLASH IS 0.010 (0.250) PER SIDE. 4. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 5. CONTROLLING DIMENSION: INCH. 6. THE PACKAGE TOP MAY BE SMALLER THAN THE PACKAGE BOTTOM BY UP TO 0.012 (0.300). DIMENSIONS R AND U ARE DETERMINED AT THE OUTERMOST EXTREMES OF THE PLASTIC BODY EXCLUSIVE OF MOLD FLASH, TIE BAR BURRS, GATE BURRS AND INTERLEAD FLASH, BUT INCLUDING ANY MISMATCH BETWEEN THE TOP AND BOTTOM OF THE PLASTIC BODY. 7. DIMENSION H DOES NOT INCLUDE DAMBAR PROTRUSION OR INTRUSION. THE DAMBAR PROTRUSION(S) SHALL NOT CAUSE THE H DIMENSION TO BE GREATER THAN 0.037 (0.940). THE DAMBAR INTRUSION(S) SHALL NOT CAUSE THE H DIMENSION TO BE SMALLER THAN 0.025 (0.635).
DIM A B C E F G H J K R U V W X Y Z G1 K1
INCHES MIN MAX 0.485 0.495 0.485 0.495 0.165 0.180 0.090 0.110 0.013 0.019 0.050 BSC 0.026 0.032 0.020 --- 0.025 --- 0.450 0.456 0.450 0.456 0.042 0.048 0.042 0.048 0.042 0.056 --- 0.020 2_ 10_ 0.410 0.430 0.040 ---
MILLIMETERS MIN MAX 12.32 12.57 12.32 12.57 4.20 4.57 2.29 2.79 0.33 0.48 1.27 BSC 0.66 0.81 0.51 --- 0.64 --- 11.43 11.58 11.43 11.58 1.07 1.21 1.07 1.21 1.07 1.42 --- 0.50 2_ 10_ 10.42 10.92 1.02 ---
MECL Data DL122 -- Rev 6
2-3
MOTOROLA
MC10H601 MC100H601
Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. "Typical" parameters which may be provided in Motorola data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. Motorola does not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part. Motorola and are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer.
Mfax is a trademark of Motorola, Inc. How to reach us: USA / EUROPE / Locations Not Listed: Motorola Literature Distribution; P.O. Box 5405, Denver, Colorado 80217. 1-303-675-2140 or 1-800-441-2447 Customer Focus Center: 1-800-521-6274 MfaxTM: RMFAX0@email.sps.mot.com - TOUCHTONE 1-602-244-6609 ASIA/PACIFIC: Motorola Semiconductors H.K. Ltd.; 8B Tai Ping Industrial Park, Motorola Fax Back System - US & Canada ONLY 1-800-774-1848 51 Ting Kok Road, Tai Po, N.T., Hong Kong. 852-26629298 - http://sps.motorola.com/mfax/ HOME PAGE: http://motorola.com/sps/ JAPAN: Nippon Motorola Ltd.: SPD, Strategic Planning Office, 4-32-1, Nishi-Gotanda, Shinagawa-ku, Tokyo 141, Japan. 81-3-5487-8488
MOTOROLA 2-4
MC10H601/D MECL Data DL122 -- Rev 6

▲Up To Search▲

Price & Availability of MC100H601

	To Download MC100H601 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .